Faculty of Electrical Engineering have established an impressive array of equipment and tools for teaching and learning, and research. The faculty's facilities and specialist equipment can be hired for use independently. Please refer to the workflow manual for further instructions. Required forms can be downloaded from here

Power Laboratory

No. Equipment Description Person-in-Charge
1 Fluke 345 Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics.

Mohd Najib Mohd Hussain (Ts.Dr.)

Mohd Affandi Shafie (Ts.)
2

Fluke 1750

Record three-phase power quality and monitor for power quality disturbances with the new Fluke 1750 Power Recorder and the Fluke Power Analyze software. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Mohd Affandi Shafie (Ts.)
Mohd Najib Mohd Hussain (Ts.Dr.)
3

DSOX3PWR Oscilloscope

The DSOX3PWR option is a power measurement and analysis option that is integrated into InfiniiVision 3000 X-Series scopes. The embedded application provides a quick and easy way of analyzing the reliability and efficiency of your switching power supply. It also supports automatic probe deskew, using the U1880A deskew fixture. Mohd Asri Abd. Samat (Dr.)
Aimi Idzwan Tajudin (Ir.)
4

Impulse Current 48kA - HV

An electrical apparatus which produces very short high-voltage or high-current surges Nur Darina Ahmad
Kamarulazhar Daud (Ts.Dr.)
5

 

AC Voltage 0-50 kV test & DC Impulse 50kV test

The modular design of this high voltage module test set (HSBS) allows it to be used to test up to 50 kV AC and capble to test DC impulse up to 50 kV Kamarulazhar Daud (Ts.Dr.)
Abdul Malek Saidina Omar (Ts.)
6

Three-Phase Power Supply (AC and DC)

Portable AC and DC three-phas epower supply used for application up to 250 V DC with 16 A current level. Mohamad Adha Mohamad Idin (Ts.)
Siti Salwa Mat Isa

 

Electronic Laboratory

No. Equipment Description Person-in-Charge
1

Silvaco TCAD

The Silvaco sofware is use for semiconductor process and electrical characterization simulation.

Alhan Farhanah Abd. Rahim (Hjh.Ir.Dr.)

Siti Zubaidah Md Saad

Rosfariza Radzali (Dr.)
2

Altera DE2-115 Trainer Board & Quartus II Software

The Altera DE2-115 Trainer Board series has consistently been at the forefront of educational development boards by distinguishing itself with an abundance of interfaces to accommodate various application needs. It offers an optimal balance of low cost, low power and a rich supply of logic, memory and DSP capabilities. Emilia Noorsal (Dr. -Ing)
Irni Hamiza Hamzah (Ir. Dr.)
3

Xilinx Spartan 3E Trainer Board & ISE Software

The Xilinx Spartan 3E Trainer Board is a complete development board solution giving designers instant access to the capabilities of the Spartan-3E family. Complete kit includes board, power supply, evaluation software, resource CD (application notes, white papers, data sheets, etc.), and USB cable. Irni Hamiza Hamzah (Ir. Dr.)
4

Keithley 6221 AC and DC Current Source

The 6221 AC and DC Current Source combine ease of use with exceptionally low current noise. Low current sourcing is critical to applications in test environments ranging from R&D to production, especially in the semiconductor, nanotechnology, and superconductor industries. Alhan Farhanah Abd. Rahim (Hjh. Ir. Dr.)
5

Keithley 4200-SCS Parameter Analyzer

The 4200 is the highest performance parameter analyzer, it delivers synchronizing current-voltage (I-V), capacitance-voltage (C-V) and ultra-fast pulsed I-V measurements. Alhan Farhanah Abd. Rahim (Hjh. Ir. Dr.)
6

MINI Probe Station & Components Test Fixture

MINI Probe Station kit for use with 4" or smaller wafers, wide platen bars, complete with Stereo Zoom microscope with illumination and 4 probes holder.

Components Test Fixture is to hold two or four legs electronic components.
Alhan Farhanah Abd. Rahim (Hjh. Ir. Dr.)
7

Keithley 2450 & 2460 I-V measurement

Keithley’s touchscreen graphical source measure unit instruments bring an intuitive experience to your bench for power sourcing and measurement needs. Irni Hamiza Hamzah (Ir. Dr.)
8

PCB Fabrication System

A complete system for PCB fabrication Linda Mohd Kasim (Ts.)
Nazirah Mohamat Kasim (Ts.)
9

 

Digital Oscilloscope DSO Keysight InfiniiVision DSO-X 2012A 2 analog channel 100MHz scope 

Features
1. Only economy-class scopes with mixed-signal capability
2. Only 20 MHz built-in WaveGen function generator
3. 8.5" WVGA display with 2X the viewing area and 5X the resolution
4. Up to 50,000 Waveform updates/second
5. Fully upgradable: bandwidth, MSO, measurement applications and WaveGe
Mohd Hanapiah Abdullah (Dr.)

 

Instrumentation and Measurement Laboratory/Biomedical Laboratory

No. Equipment Description Person-in-Charge
1

K&H KL-720

Biomedical Measurement System Rohaiza  Baharudin (Ts.)
Siti Noraini Sulaiman (Prof.Madya.Ts.Dr.)
2

Sensor Technology Modular

Thermocouple, Strain gauge, Willmill, Liquid Level Rohaiza  Baharudin (Ts.)
 Siti Noraini Sulaiman (Prof.Madya.Ts.Dr.)
3

Basic Pneumatic & Electro Pneumatic

Single-acting cylinder control, double-acting cylinder, pneumatic valve control
Solenoid valve, single-acting cylinder, double-acting cylinder
 Rohaiza  Baharudin (Ts.)
 Siti Noraini Sulaiman (Prof.Madya.Ts.Dr.)

 

Robotic and Automation Laboratory

No. Equipment Description Person-in-Charge
1

National Instrument NI ELVIS 11+

The NI Engineering Laboratory Virtual Instrumentation Suite (NI ELVIS) II is a modular engineering educational laboratory device developed specifically for academia. With its hands-on approach, educators can help students learn practical, experimental skills. NI ELVIS II features one compact form factor integrated with 12 of the most commonly used instruments in the laboratory, including an oscilloscope, digital multimeter, function generator, variable power supply, and Bode analyzer Adi Izhar Che Ani (Ts.)
Rozan Boudville (Dr.)
2

USB Data Acquisition (DAQ) NI USB 6008

The USB‑6008 is a low-cost, multifunction DAQ device. It offers analog I/O, digital I/O, and a 32‑bit counter. The USB‑6008 provides basic functionality for applications such as simple data logging, portable measurements, and academic lab experiments. The device features a lightweight mechanical enclosure and is bus powered for easy portability. You can easily connect sensors and signals to the USB‑6008 with screw-terminal connectivity  Adi Izhar Che Ani (Ts.)
 Rozan Boudville (Dr.)

 

Pneumatic & Hydraulic Laboratory

No. Equipment Description Person-in-Charge
1

Pilot Plant (Differential DP Training) Y-LFP-01 YOKOGAWA

 Level control, air pressure control and cascade loop Saiful Zaimy Yahaya (Dr.)
Rozan Boudville (Dr.)
2

DIDACTA PN67D Modular Pneumological Tutor

 Basic pneumatic, Pneumatic logic and Electro-pneumatic  Saiful Zaimy Yahaya (Dr.)
Zakaria Hussain (Prof.Madya. Ir. Dr.)
3

Pneumatic Trainer Unit

Basic pneumatic  Saiful Zaimy Yahaya (Dr.)
 Zakaria Hussain (Prof.Madya. Ir. Dr.)
4

Pneumatic Trainer Unit

Pneumatic transmitter, Manometer MT200, Portable pneumatic calibrator  Zakaria Hussain (Prof.Madya. Ir. Dr.)
  Saiful Zaimy Yahaya (Dr.)
5

Pneumatic Trainer Unit

Drilling and milling   Saiful Zaimy Yahaya (Dr.)
 Rozan Boudville (Dr.)

 

Automatic Control Laboratory

No. Equipment Description Person-in-Charge
1

Modular Servo System

Basic closed-loop control system (Tie response analysis)  Zakaria Hussain (Prof.Madya. Ir. Dr.)
  Saiful Zaimy Yahaya (Dr.)
2

Process control trainer

Process control trainer for demonstrating closed and open-loop continuous control as well as two-step control.  Zakaria Hussain (Prof.Madya. Ir. Dr.)
  Saiful Zaimy Yahaya (Dr.)